12
STRAIGHT SHAFT TRIMMER
ATTACHMENT SHAFT
Fig. 12
MAINTENANCE
STORING THE STRAIGHT SHAFT TRIMMER
ATTACHMENT
Store the straight shaft trimmer attachment in a well
ventilated place that is inaccessible to children. Keep away
from corrosive agents such as garden chemicals and de-
icing salts.
To remove the straight shaft trimmer attachment from the
power head for storage:
1. Loosen the knob on the coupler device.
2. Push the button in, then twist the shafts to remove and
separate the power head from the attachment.
For storing information:
Please refer to the Operator’s
Manual of your power head.
ATTACHING THE STORAGE HANGER
See Figure 12.
There are two ways to hang your attachment for storage.
z
To use the hanger cap, push in the button and place the
hanger cap over end of the straight shaft trimmer
attachment shaft. Slightly rotate the cap from side to
side until the button locks into place.
z
The secondary hole in the straight shaft trimmer attach-
ment shaft can be used for hanging purposes as well.
BUTTON
HANGER CAP
SECONDARY HOLE
