10
MAINTENANCE
STORING THE EDGER ATTACHMENT
Store the edger attachment in a well ventilated place that is
inaccessible to children. Keep away from corrosive agents
such as garden chemicals and de-icing salts.
To remove the edger attachment from the power head for
storage:
1. Loosen the knob on the coupler device.
2. Push the button in, then twist the shafts to remove and
separate the power head from the attachment.
For storing information: Please refer to the operator’s
manual of your power head.
ATTACHING THE STORAGE HANGER
See Figure 8.
There are two ways to hang your attachment for storage.
l
To use the hanger cap, push in the button and place the
hanger cap over end of the edger attachment shaft.
Slightly rotate the cap from side to side until the button
locks into place.
l
The secondary hole in the edger attachment shaft can
be used for hanging purposes as well.
BUTTON
HANGER CAP
SECONDARY HOLE
EDGER ATTACHMENT
SHAFT HOUSING
Fig. 8
MAINTENANCE
