ThinConnect4
<107>
7.2 Static Routing Settings
This setup is optional. It is not necessary for the function of ThinConnect4. With this
setting, ThinConnect4 can transfer the received packet to the other router.
It sets up the Network and Gateway address.
•
Routing setup according to registered current routing information
The packet on authorized network address will be transferred to the other
router assigned by gateway address.
•
Using default LAN gateway
The packets on authorized routing information and the other IP addresses
within a LAN will be transferred to the IP address (router) assigned by
default gateway.
Note: ThinConnect4 can setup one default gateway only. If you choose any of
the connection types below, ThinConnect4 serial port becomes the
default gateway.
•
ISP Dial-Up IP Connection
•
RAS Client Dial-Up IP Connection
•
ISP Networking Dial-Up IP Connection
•
ISP Leased Line IP Connection
If you select the “Use Default Gateway on Your LAN” box, the following
function are available:
•
RAS Server IP Connection
•
Networking Dial-Up IP Connection”
•
Leased Line Connection (without default gateway)
