background image

17

TROUBLE SHOOTING

Symptom:

After finishing the installation, select Control Panel, Game
Controller/Joystick. The Systems freeze, and no mouse or
keyboard response.

Solution:

Remove the PCMCIA card. Restart the computer, go to
Start, Setting, Control Panel, System then Device
Manager. Double click on Sound, Video and Game
Controller. If there is an item regarding Game port
Joystick, you need to DISABLE the item. Double click on
the Game port Joystick line, under the General Tab and
put a check mark on “Disable in this Hardware profile”

box.

Or

Check you CMOS Setup, or BIOS setup for
Gameport/JoyStick entry, then choose DISABLE.

Symptom:

Game Controllers or Joystick status is “Not Connected”

Solution:

Make sure the other Game port Joy stick has been
disabled. Go to Start, Setting, Control Panel, System then
Device Manager. Double click on Sound, Video and
Game Controller, then click on PCMCIA GAME Card,
then click on Resources tab. Change to a different basic
configuration.

Make sure the Game Controller/joystick selection matches
the one which is connected to the PCMCIA GAME card.
There should be only one Game Controller/joystick listed.

Summary of Contents for Game Traveler




















Reviews: