14
/P
is used to set the I/O port, and the valid numbers are 200 (default) and
201.
If your computer has been loaded with ExCA compliant PCMCIA software,
then you are allowed to hot insert/remove the Game Card, which means you
can connect/remove the GAME TRAVELER PLUS/MIDI TRAVELER
Card or GAME TRAVELER Card all the time without rebooting your
system. If your system doesn’t have the software, however, each time you
remove the card and need to use it again, you have to type
E X P G A M E . E X E
/ P 2 0 0
at DOS prompt to enable the GAME TRAVELER PLUS/MIDI
TRAVELER Card or GAME TRAVELER Card.
SOFTWARE INSTALLATION FOR WINDOWS NT 4.0
There are two steps you should follow to install the PCMCIA game card’s
device driver. If you have the GAME TRAVELER PLUS/MIDI
TRAVELER Card, currently only the game function is supported.
1.
Click Start, Settings, Control Panel.
2.
Open the "Multimedia" Icon in the Control Panel.
3.
Select the "Devices" tab.
4.
Click the "Add..." button.
5.
Choose "Unlisted or Updated Driver"
6.
Enter the path name which contains OEMSETUP.INF:
A:\WINNT
7.
Choose "PCMCIA Gameport Joystick"
8.
Click "OK". If asked to install new or current driver, choose "New"
9.
Choose to use joystick port 201 and click "OK"
10.
When the system prompts you to restart Windows NT, click "Don't
Restart Now"
Add PCMCIA game card configuration into Windows NT registry.
