- 17 -
SOFTWARE INSTALLATION FOR WINDOWS NT
Make sure of the following before you begin:
♦
Windows NT must be version 3.51 or higher.
♦
Since Windows NT does not support the “Hot Insert/Remove” feature,
the PCMCIA CD-ROM should be connected with your computer prior
to starting Windows NT. Likewise, do not remove the PCMCIA CD-
ROM before you shut down Windows NT.
♦
In Windows NT, the I/O and IRQ settings of PCMCIA CD-ROM
cannot be changed. Therefore, if the settings conflict with other devices
you are using, change the I/O or IRQ of other device to avoid conflicts.
Installing the PCMCIA CD-ROM driver
To open the Control Panel folder, in Windows NT 4.0, go to the
Start
menu
and select
Settings
. Then, click on the
Control Panel
item. Once the
Control Panel window appears, double click the
SCSI Adapter
icon.
Click the
Drivers
tab and the illustrated figure below will be displayed.
