ExoSlide Ender 3 Y Bed, Build Manual, Page: 4 / 6

5. Gantry Assembly:
Parts Needed:
Motor bracket assembly, 1x
Idler bracket assembly, 1x
Carriage assembly, 1x
Belt, 1x
Printed end-stop, 1x (when
installing only the Y ExoSlide kit)
Re-use:
End-stop assembly (when installing
XY ExoSlide kit as well)
Notes:
-Install the carriage assembly first, then the other assemblies.
-Tension the belt with the idler assembly.
-If only installing the Y ExoSlide kit, install the printed end-stop bracket (to clear bed plate of the
next step)