0.
Parts removal and prep:
-Remove the front Y belt Idler and bracket
-Remove the rear Y belt motor and bracket – set aside the motor to re-use
-Remove the rear Y endstop – set aside to re-use
-Loosen all the bed hand adjusters, and remove the heated bed plate – set aside to re-use
-Loosen the V-wheels, and remove the bed carrier plate – set aside the carrier plate to re-use
-Remove the 2040 or 4040 (Pro) Y bed extrusion.
1.
Bed Rail Mounting:
Parts Needed:
-Printed bed mount, 1x
-M5x40 bolt, 4x (Pro 6x)
-M5 nylock nut, 2x (non-
Pro)
-2040 Extrusion, 1x
Ender 3 (non-Pro) Ender 3 Pro
Notes:
-Install the bed mount on the frame the then the 2040 extrusion on top, using the M5x40 bolts.
-For the Ender 3 (non-Pro), install the captured M5 nylock nuts into the mount first.
-Do not overtighten the bolts!