Exorigo-Upos Taurus Online, User Manual

Page: 21 / 38

User manual – TAURUS ONLINE
21
•
the printer should not be used or stored in dusted or dirty places,
•
no foreign materials or liquids may be let in the device,
•
the printer should be placed on a firm surface, intensive vibrations or shocks may damage it,
•
the printer should be surrounded by sufficient space around it so that the service actions could be easily
conducted,
•
the devices cooperating with the printer should have the CE mark.
3.4 BASIC PRINCIPLES OF THE PRINTER’S OPERATION
At the operation of the device:
•
never pull the paper hanging out of the printer when the printer mechanism is closed,
•
the heating element of the printing head and its sliding mechanism may be damaged easily in contact
with any metal object, therefore they must be protected, as appropriate,
•
the printing head and its direct neighborhood become strongly heated, they should never be touched
while printing and right after,
•
the printing mechanism should be never opened while printing,
•
the surface of the printing head should be never touched, as smudging it may affect the heating element
negatively,
•
only paper corresponding with the specification should be used, as thermal paper containing sodium,
potassium, chlorine or other ions may affect the heating element negatively,
•
using the printer in highly dusted or dirty conditions will cause reduction of the printing head’s life span,
•
one should not allow the vapor condensation inside the printer and in such event, the device should
be opened before switching on and one should wait until the water evaporates,
•
for avoiding a paper jam, one should neither cover with his/her hand the opening where the receipts
go out, nor place any objects in front of it,
•
the device may be plugged only to the power supply indicated in the manual instruction, it is not allowed
to make any changes independently on the power supply cable,
•
if the printer has been damaged, it should be unplugged from the power supply – taking off the plug
from the socket; one should always pull the plug, not the cable,
•
it is not allowed to dis assemble the printer’s elements independently, as an electric shock may occur –
only authorized service provider has the right to the justified disassembly,
•
the waste paper core should be disposed of in compliance with the local regulations,
•
at the device’s disassembly, the plug should be plugged off the network socket first and one should be
careful not to damage the power supply cable,
•
the printer should not be used when the paper is not placed properly (the manner of replacement of
paper is shown in the further part of this manual instruction),
•
the correct size of the paper roll has influence on proper loading paper and avoiding paper jams.