UK |
7
3112016_EFC18_UK
Warning
To minimise the risk of fire, electric shock, personal injury
and/or damage to the product please observe the following:
• Please always read the manual and only use the product in accordance with the
manufacturer’s instructions. If in doubt, contact one of the Exodraft specialized dealers.
•
All installations must be carried out by properly qualifi ed personnel in accordance with
national legislation and regulations.
•
This product must be earthed. Get assistance from an qualifi ed electrician when in doubt.
• This product must always be disconnected under the installation.
• Prior to servicing the product, disconnect the power and ensure that it cannot accidentally
be reconnected.
•
Exodraft always recommends the use of a smoke alarm when a solid fuel open fire is
installed.
• If the Exodraft fan system has been designed for solid fuel/multi fuel installations, please
ensure that the design meets the requirements of BS EN15287-1. If this cannot be achie-
ved, a smoke alarm must be installed in the same room as the heat appliance.
UK
Your energy.
Optimized.
Product information
Exodraft control EFC18 is, like the Exodraft chimney fan, designed to be used with fire places, stoves and
boilers for solid fuel.
Using the temperature sensor, the control unit can stop and start the chimney fan automatically.
Simple programming allows the EFC18 to be used with either an open fire, a stove or boiler.
If more fuel needs to be added whilst the fire is burning the fan speed can be increased to full for 3 minutes
by a single press on the ON/OFF button.
The fan voltage and speed has an adjustment between 1 and 9.
Incorrect use may result in problems with soot, chimney fires, etc. which might damage the product.
Please check out this site for advice about the product:
www.exodraft.com
Scope of supply
• Exodraft EFC18
• Temperature sensor
• Installation manual and user instructions
Accessories
The table below shows the accessories and spare parts available for the RHG-models.
Accessories*
Temperature sensor
Isolation switch
*This manual does not describe the specific use of accessories. We refer to the separate manuals for such components.
For more details contact your Exodraft dealer.
