ENGLISH
FRANÇAIS
DEUTSCH
ESP
AÑOL
IT
ALIANO
NEDERLANDS
F
13. Connect the tubing coming from the Y-connector to the top of the
unit by pressing the tubing firmly into the connector on top of the
control unit. (fig.F)
14. Make sure that the filter is properly connected to the spigot on the
underside of the control unit and placed inside the reservoir.
15. Ensure that the top of the Monsoon MULTI unit fits tightly on top
of the reservoir.
G
16. Open the small lid on top of the unit, and fill the reservoir with
de-mineralized/distilled water up to a maximum of 2,5 cm (1”) from
the top rim of the transparent reservoir. (Using regular tap water
will cause clogging of the nozzles by mineral deposits!) (fig. G)
17. Close the lid and connect the power supply jack to the back of
the unit.
18. Make sure the unit is in its final operating location, on a solid,
level surface.
19. Plug the power adaptor into the wall socket, your Exo Terra
®
Monsoon MULTI High-pressure Misting system is now ready to use.
In order to remove the tubing from either the Y-connector or the
unit, press and hold the blue ring down, while pulling out the tubing.
Please note that nozzles can be mounted in multiple terrariums.
