Operation
caution when positioning your hands so that you
Do Not set them down on your hands or fingers.
g007983
Figure 21
1.
Toe board weight
2.
Hairpin
30.
For 11-Bushel Unit Only:
A.
Install the removable caster weights over the
caster arms (see Figure 22).
B.
Install a clevis pin and hairpin on each caster
weight to retain them.
C.
Tighten knob on weight assembly until the
weight is clamped securely to the caster arm.
g032038
Figure 22
1.
Clevis pin
3.
Hairpin
2.
Knob
4.
Caster weight
After Operation
General Safety
•
Park machine on level ground, disengage drives,
set parking brake, stop engine, remove key or
disconnect spark plug wire. Wait for all movement
to stop and allow the machine to cool before
adjusting, cleaning, repairing, or storing. Never
allow untrained personnel to service machine.
•
Clean the machine as stated in the Maintenance
section.
•
Frequently check for worn or deteriorating
components that could create a hazard. Tighten
loose hardware.
18
