Operation
the spring clevis pin from the handle link. Rotate
the handle link towards the actuation arm bracket
and align the holes. Insert the spring clevis pin
and rotate it downward to latch it onto the handle
link.
g007999
Figure 12
1.
Handle link
4.
Handle assembly
2.
Actuation arm bracket
5.
Nut
3.
Spring clevis pin
6.
Bolt
14.
Remove the belt cover on the right side of the
deck.
15.
Mount the blower on the deck by inserting the
mounting pin into the tube welded to the rear
corner of the deck (see Figure 13). Pivot the
blower until the front pin engages the slot in
the deck. Adjust the position of the front pin if
necessary to engage the slot. Use the latch to lock
the blower in this position. Adjust the tension on
the latch to hold the blower up to the deck, yet
allow for release by hand.
g032036
Figure 13
1.
Slot
4.
Mounting pin
2.
Front pin
5.
Deck tube
3.
Blower latch
15
