Operation
g007989
Figure 5
1.
Hopper
7.
Toe board weight
2.
Reinforced bumpers
8.
Belt cover
3.
Clevis pin
9.
Blower
4.
Caster arm weight
10.
Tubes
5.
Hairpin
11.
Door
6.
For 11-Bushel Unit Only
4.
Remove the knob from the belt cover bracket and
take off the belt cover.
g007981
Figure 6
1.
Belt cover bracket
4.
Belt
2.
Belt cover
5.
Deck sheave
3.
Knob
CAUTION
The deck sheave will become very hot.
Touching a hot deck sheave can cause severe
burns.
Allow the deck sheave to cool completely
before removing the belt.
5.
Pull the idler release handle and remove the belt
from the upper groove of the deck sheave.
6.
Unlatch the front end of the blower. Pivot the
blower back and lift it off the deck.
g032035
Figure 7
1.
Blower latch
2.
Pivot the blower away
from the deck
7.
Install the discharge deflector using the chute
pivot pin and hairpin (see Figure 8).
g009319
Figure 8
Viewed from the right side
1.
Hairpin
3.
Discharge deflector
2.
Chute pivot pin
12
