Maintenance
To learn more about the Exmark twin-cylinder engine
go to http://exmark.com/engines or scan the QR
code.
g028322
Figure 34
708cc Engine
Servicing the Engine Oil
Checking the Engine Oil
Level–Exmark 452cc Engine
Service Interval: Before each use or daily
Important:
Do not overfill the crankcase with oil
and run the engine; engine damage may result.
1.
Park the machine on a level surface and disengage
the blade control switch.
2.
Move the motion control levers out to the neutral
lock position, engage parking brake, stop the
engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3.
Make sure the engine is stopped, level, and is cool
so the oil has had time to drain into the sump.
4.
To keep dirt, grass clippings, etc., out of
the engine, clean the area around the oil fill
cap/dipstick before removing it.
5.
Check the engine oil level.
g029368
Figure 35
6.
If the level is low, wipe off the area around the oil
fill cap, remove cap/dipstick and add oil to the
“FULL” mark on the dipstick. Exmark 4-Cycle
Premium Engine Oil is recommended; refer to
the following information for an appropriate API
rating and viscosity. Always check the level with
the dipstick before adding more oil.
Do Not
overfill.
•
Crankcase Capacity: 1.05L (36 oz) when the
filter is changed.
•
Recommended Oil Type: Exmark 4-Cycle
Premium Engine Oil
– API service SF, SG, SH, SJ, or higher
41
