Exmark Metro 26 Operator'S Manual Download | Manualshive

Page: 2 / 44

background image

i

WARNING

POTENTIAL HAZARD

♦

This product is a piece of power equipment.

WHAT CAN HAPPEN

♦

Failure to follow safe operating practices can result in serious

operator injury or even death.

HOW TO AVOID THE HAZARD

♦

Keep all shields, guards, and safety devices (especially the grass

discharge system) in place and in proper working condition.

♦

Stop engine, wait for all moving parts to stop and engage parking

brake. Remove spark plug wire(s) or remove key before
adjusting, servicing, or performing maintenance.

♦

If mower deck becomes clogged, stop engine, wait for all moving

parts to stop and engage parking brake. Remove spark plug
wire(s) or remove key before cleaning blockage.

♦

Keep hands, feet, and clothing away from power driven parts.

♦

Keep off mower unless seat platform is provided.

♦

Keep others off mower.

WARNING

POTENTIAL HAZARD

♦

Gasoline is harmful or fatal if swallowed. Long-term exposure to

vapors has caused cancer in laboratory animals.

WHAT CAN HAPPEN

♦

Failure to use caution may cause serious injury or illness.

HOW TO AVOID THE HAZARD

♦

Avoid prolonged breathing of vapors.

♦

Keep face away from nozzle and gas tank/container opening.

♦

Keep away from eyes and skin.

♦

Never siphon by mouth.

IMPORTANT

When the mower is used or operated on any California forest, brush or grass covered land, a working
spark arrester must be attached to the muffler. If not, the operator is violating state law, Section 4442
Public Resource Code. To acquire a spark arrester for your unit, see your Engine Service Dealer.

This spark ignition system complies with Canadian ICES-002
Ce système d’allumage par ètincelle de vèhicule est conforme à la norme NMB-002 du Canada

The enclosed Engine Owner’s Manual is supplied for information regarding The U.S.
Environmental Protection Agency (EPA) and the California Emission Control Regulation of
emission systems, maintenance and warranty.

Keep this engine Owner’s Manual with your unit. Should this engine Owner’s Manual become
damaged or illegible, replace immediately. Replacements may be ordered through the engine
manufacturer.

Exmark reserves the right to make changes or add improvements to its products at any time without
incurring any obligation to make such changes to products manufactured previously. Exmark, or its
distributors and dealers, accept no responsibility for variations which may be evident in the actual
specifications of its products and the statements and descriptions contained in this publication.

«
1
2
3
4
...
»

Summary of Contents for Metro 26













































Reviews:

No comments

Related manuals for Metro 26

Brand: McCulloch Pages: 36

Brand: P1PE Pages: 28

Brand: Yard Machines Pages: 72

Brand: Poulan Pro Pages: 52

44 968999551, 50 968999552, 44

Brand: Dixon Pages: 88

Brand: Toro Pages: 8

Brand: Rally Pages: 28

Brand: McConnel Pages: 108

Craftsman 944.601181

Brand: Sears Pages: 52

Brand: MTD Pages: 40

Tri King 1900 Series

Brand: Jacobsen Pages: 30

Brand: Woods Pages: 28

Brand: Murray Pages: 52

LX466 13AT61RH044

Brand: Toro Pages: 36

Brand: Brave Pages: 24

Brand: Wolf Garten Pages: 29

Brand: Texas Andreas Petersen Pages: 11

Brand: Toro Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands