Exmark LAZER Z LPG Operators, Operator'S Manual

Page: 12 / 64

Safety
CAUTION
If the ignition is in the “ON” position there
is potential for sparks and engagement
of components. Sparks could cause an
explosion or moving parts could accidentally
engage causing personal injury.
Be sure ignition switch is in the “OFF”
position before charging the battery.
• Keep all guards, shields and all safety devices in
place and in safe working condition.
• Check all bolts frequently to maintain proper
tightness.
• Frequently check for worn or deteriorating
components that could create a hazard.
WARNING
Removing standard original equipment
parts, or using non-Exmark replacement
parts and accessories may alter the warranty,
traction, and safety of the machine. Failure
to use original Exmark parts could cause
serious injury or death.
Replace all parts including, but not limited to
tires, belts, and blades with original Exmark
parts.
WARNING
Hydraulic fluid escaping under pressure
can penetrate skin and cause injury. Fluid
accidentally injected into the skin must be
surgically removed within a few hours by a
doctor familiar with this form of injury or
gangrene may result.
• If equipped, make sure all hydraulic fluid
hoses and lines are in good condition
and all hydraulic connections and fittings
are tight before applying pressure to
hydraulic system.
• Keep body and hands away from pinhole
leaks or nozzles that eject high pressure
hydraulic fluid.
• Use cardboard or paper, not your hands,
to find hydraulic leaks.
• Safely relieve all pressure in the hydraulic
system by placing the motion control
levers in neutral and shutting off the
engine before performing any work on
the hydraulic system.
12