Exlar Tritex II DC Series, Installation And Service Manual

Page: 14 / 70

Curtiss-Wright | Tritex II DC Rev. J PN49220 2/8/2016 14
General Specifications
Drive Specification for all Tritex II DC Models with embedded drives
Embedded Drive Specifications
Input Voltage,
Bus and Logic
12-24VDC nominal for CSA certified installation
12-48VDC nominal for general use
Internal logic remains active with Bus or Logic power at 9V min
I/O Power
Supply
12-24V nominal, 30V max, 9V min
Models with brakes require 24V +/- 10% for brake operation
SIO & Ethernet
Options IA4 Option Details
Digital Inputs,
8 4
Opto-isolated,
0-5V or 0-2mA OFF,
8-30V or >3mA ON,
programmable functions
Digital Outputs,
4 3
Opto-isolated,
1V max ON state voltage drop,
100mA max continuous load,
short circuit & overload protect,
programmable functions
Analog Input,
+/-10V,
differential
input 13 bit
resolution
Isolated 4-20 mA,
with >14 bit
resolution,
ext power, 12V
max drop @
22mA
Programmable as position,
velocity or torque command
Analog Output,
0-10V, 11 bit
resolution
Isolated 4-20 mA
12 bit resolution,
ext power, 8V lift-
off @ 21mA
Programmable functions
Serial Interface
RS485, Modbus RTU protocol, max baud rate 38.4k, Isolated
Commutation
Sinusoidal, 10kHz PWM
Resolution
(Std. Feedback)
0.001 revolution
Accuracy
(Std. Feedback)
+ / - 0.002 revolution
Output Current
Continuous and peak output current is dependent on actuator
Environmental
Ambient Temperature for rated output: 40°C
Maximum Operating Temperature Range:
0°-65°C with power de-rating
Humidity: 10-95% non-condensing
Altitude: 3000 m above sea level maximum