background image

 

 
 

 
The Outdoor Modular Island series has been developed with versatility in mind. The cabinets can be assembled in virtually 
any  combination  to  suit  your  individual  needs.  They  can  be  assembled  against  a  house  wall  or  as  a  standalone  island, 
becoming  the  focal  point  of  your  backyard.  With  multi-function  and  storage  capabilities,  your  backyard  island  can  be 
transformed into an outdoor kitchen, placing the host in the center of the action when entertaining guests. 
The cabinets are designed to be easy to assemble and install for either the home owner or private contractor. All cabinets 
are  890mm  tall  by  710mm  deep.  All  cabinets  are  710mm  wide  except  for  the  BUILT-IN  grill  cabinets  whose  width, 
corresponds to the width of the unit it was designed for. Each cabinet has 4 leveling feet for adjustment on even surfaces. 
The 2 drawer under grill cabinets are made to fit the Napoleon BUILT-IN series of grills only and are available in several 
different sizes. BUILT-IN grills come in several different sizes. Refer to the installation manuals that come with the grill head 
for proper installation and operating instructions. 
The  BUILT-IN  series  of  grills  can  be  ordered  in  your  choice  of  propane  or  natural  gas  configuration.  Natural  gas  is  an 
obvious selection for many people that already have it available in their home. All gas modifications or installations must 
be done by a qualified gas installer. Knockouts are present in the side and rear panels for easy piping and installation. For 
those who order a propane grill, a propane tank cabinet is available. 
The cabinets can be installed against a 

NON-COMBUSTIBLE

 wall of a house, a masonry or stucco half-wall, or freestanding 

in an island configuration. A powder coated 50mm wide end panel is included to cover the knockouts and mounting holes 
in the outside panels in a run of cabinets, giving a more finished look. 
When utilizing 45° and 90° transitions in your design, modules on either side of the transition need to be chosen, carefully. 
If doors or drawers are used on either side of the transition, they will interfere with each other when opened. 
If a drawer module is placed next to a grill, the control panel on the grill will prevent the top drawer from opening. Door 
modules can be used with 45° transitions, but the control panel will prevent the door from fully opening and may damage 
the door.   
Optional built-in side burner kits or sink kits are available through your Napoleon Gas Grill dealer. These side burner kits 
and sink kits are an excellent complement to the BUILT-IN series of grills. We recommend that the side burner kit or sink, 
be installed over the top of the SC-UNI cabinet with SC-SK or SC-SINK kits. It has the separation panel at the top of the 
cabinet which allows protection for the side burner valve and hose routing. When installing the SINK kit, it is preferable to 
remove the separation panel. 
Countertops can be purchased from your dealer in a modular form in black granite. You may also want to custom order 
your granite top to your preferred colour and to fit your configuration. The countertop material must be 

NON-COMBUSTIBLE

 if a grill is to be installed into it. They can be ordered in advance by drawing out the floor plan of how 

the cabinets will be situated and adding up the width measurements, allowing 1-2 inches of countertop overhang. Most 
countertop  manufacturers  are  willing  to  come  and  take  measurements  after  assembly  of  the  cabinets  is  complete  to 
ensure a perfect fit. The built-in grill head comes with stainless steel brackets and hardware that allow the unit to rest on 
the countertop above the corresponding island cabinet for that unit. Granite or Corian are excellent choices of countertop 
materials.  Decorative  countertops  made  of  ceramic  tile  set  on  top  of  cement  tiling  board  can  be  made  to  match  your 
surrounding backyard furniture colors 

 

 

 

 

PLANNING YOUR MODULAR OUTDOOR ISLAND 

 

Summary of Contents for Island series




















Reviews: