Amplifier Owner’s Manual
© 2007 Exile Car Audio • www.exileaudio.com
Amplifier Manual
STRAP Min. Impedance: 2 ohm
X2400.1 - X1200.1 STRAP
TECHNOLOGY
The below example shows how to STRAP two X2400.1s together to power a single voice coil. The
result of this wiring is 4800+ watts into a single 2 ohm voice coil. (Or 2400+ watts if using two
X1200.1s)
The master amplifier’s settings (bass boost, gain, subsonic, XRB1. etc) will control both amplifiers.
So the settings on the slave amplifier are not used.
Set Switch
OUTPUT
MASTER
RCA CABLE
Set Switch:
INPUT SLAVE
Connect the amplifiers’ (-) negative speaker terminals together.
Connect the amplifiers’ (+) positive speaker terminals to the
speakers’ (+) positive and (-) negative terminals.
