Exido 246-050, Manual, Page: 23 / 32

22 23
Check regularly that neither cord nor plug is •
damaged. Do not use if they are damaged or if the
appliance has been dropped or damaged in any
other way.
If the appliance, cord or plug have been damaged,
•
have the appliance inspected and if necessary
repaired by an authorised repairer. Never try to
repair the appliance yourself. Please contact the
store where you bought the appliance for repairs
under the guarantee. Unauthorised repairs or
modifications to the appliance will invalidate the
guarantee.
KEY TO THE MAIN COMPONENTS OF THE
APPLIANCE
Cover for blender opening 11
Control panel 21
Arm release handle 31
Motor section 41
Meat screens (3 pcs.) 51
Dough hook 61
Dough whisk 71
Balloon whisk 81
Tamper 91
Meat grinder body 111
Meat grinder body ring nut 111
Splash guard 121
Scroll 131
Knife 141
Silicone coupling for scroll 151
Tray 161
Blade 171
Blender jug 181
Blender jug lid 191
Cap 211
Release button for lid 211
Mixing bowl 221
Lid 231
Motor spindle (not visible on picture) 241
Accessories socket 251
Arm 261
Control panel
Speed 1 button a1
Speed 2 button b1
Speed 3 button c1
Speed 4 button d1
Speed 5 button e1
P button f1
(pulse function)
OFF button
g1
(switch off/pause)
PRIOR TO FIRST USE
Remove all packaging and transport materials from •
the inside and outside of the appliance.
Check that the appliance has no visible damage
•
and that no parts are missing.
To remove any excess metal from the production
•
process, we recommend you fit the scroll (13), knife
(14) and meat screen (5) in the meat grinder body
(10) (see below) and allow the appliance to run for
approximately 2 minutes with each meat screen
without food. Then clean the accessories before
use.
Clean all parts that come into contact with food
•
before using the appliance for the first time (or
after prolonged storage). See “Cleaning”.
USING YOUR KITCHEN APPLIANCE
Assembly
Place the motor section (4) on a flat surface, e.g. 11
a kitchen counter, and make sure it is standing
firmly.
Check that the protective cover is fitted in the
21
accessory socket (25) and that the cover for
the blender opening (1) has been fitted over the
blender opening.
Tilt down the arm release handle (3). The arm (26)
31
tilts upwards.
Fit the lid (23) onto the underside of the arm
41
and turn it slightly to the left, so that it locks into
position.
Fit the mixing bowl (22) in the recess on the
51
motor section base. Turn the mixing bowl slightly
clockwise, so it locks into position.
First mount the splash guard (12)
61
on the dough hook (6) or the dough
whisk (7) (see the pictures). Turn the
accessory clockwise until the metal
pins lock into position.
Then fit the desired accessory onto
71
the accessory shaft (24) on the
underside of the arm.
The dough hook is used for o
heavy dough, minced meat or
other demanding kneading jobs.
The dough whisk is used to mix
o
lighter types of dough.