6
En
gl
is
h
Operating instructions
Switching on/off
1. Switch the radio on by pressing [
].
2. The first time the radio is switched on it will automatically search for DAB channels.
3. Whilst the radio is scanning, “Scanning…” will appear on
the display along with a progress bar indicator and a number
showing how many channels have been found.
4. Once the scan has finished, the radio will select the first
alphanumerically found channel.
•
Note:
If no DAB channels are found “No DAB Station” will appear on the display.
Thereafter the radio will revert to showing the DAB menu.
• Make sure that DAB broadcasts are available in your geographical area.
• If reception is poor, try to change the position of the aerial or move the radio to
improve reception.
• Refer to the DAB menu section to carry out a new channel search.
Audio setting
Adjust the volume by turning the volume dial (9).
Note:
The radio always starts on the same volume.
Display backlight
Adjust the display backlight by repeatedly pressing the [ SNOOZE/DIMMER ] button.
There are four settings to choose from:
Low
,
Medium
,
High
and
Off
.
Note:
The backlight feature only works during mains operation. During battery
operation the backlight is automatically dimmed to save power. Every press of
the button increases the brightness for 5 seconds before it returns to dimmed mode.
Setting the time and date
The time and date are set automatically with the help of DAB or FM radio signals
(the time is set approximately 2 minutes after the radio is switched on).
The time and date can also be set manually if the radio signal is too weak:
1. Press and hold in [ MENU/INFO ]. Press [ |
◄◄
] or [
►►
| ] repeatedly to navigate
the menu.
2. Select
System
. Press [ SELECT ] to confirm.
3. Select
Time
. Press [ SELECT ] to confirm.
4. Select
Set Time/Date
. Press [ SELECT ] to confirm. “Set Time” appears on
the display and the hours flash.
5. Set the hours with [ |
◄◄
] or [
►►
| ] and confirm with [ SELECT ].
Summary of Contents for X40BT
Page 2: ...2...
