14
En
gl
is
h
Activating/Deactivating a programmed alarm
In on mode
1. Select which alarm is to be activated/deactivated by pressing [ ALARM ] repeatedly.
2. Press [ |
◄◄
] or [
►►
| ] repeatedly to select
On
(activate) or
Off
(deactivate).
Confirm by pressing [ SELECT ].
In standby mode
Press [ ALARM ] the required number of times to activate/deactivate either of
the respective alarms.
Care and maintenance
• The radio can be wiped clean using a soft, dry cloth.
• Unplug the mains adaptor from the wall socket and remove the batteries from
the radio when it is not to be used for a long time.
Troubleshooting guide
The radio won’t
turn on.
• Make sure that the adaptor and mains lead are intact
and undamaged.
• Make sure that the mains adaptor and its lead are
properly connected both to a wall socket and the radio.
• Is the wall socket live?
• The batteries might be dead. Replace if necessary.
• If the mains adaptor is connected to the radio without
being connected to a wall socket the radio will not switch
on even if there batteries in it. Disconnect the adaptor.
No sound from
the speaker
or connected
headphones.
• Check the volume.
• Make sure that there are no headphones connected to
the 3.5 mm headphone socket. The speaker is switched
off when the headphones are connected.
• Make sure that the headphones and cord are intact and
properly connected to the radio.
Summary of Contents for X40BT
Page 2: ...2...