![background image](http://html1.mh-extra.com/html/exibel/dab-x50/dab-x50_manual_2450294012.webp)
12
En
gl
is
h
Alarm
Setting alarm 1
1. Switch the clock radio on.
2. Press [ ALARM ] once. “Alarm 1 Setup” will appear on the display.
3. Press [ VOLUME/SELECT
►
ll ]. “Alarm 1 Wizard” will appear on the display.
4. Set the alarm using [ |
◄◄
] or [
►►
| ] and confirm each step by pressing
[ VOLUME/SELECT
►
ll ].
5. Make the settings in the following order:
-
On time (alarm time): hour/min.
-
Duration (alarm duration):
15
,
30
,
45
,
60
or
90
min.
-
Source (alarm signal):
buzzer
,
DAB
or
FM
(if DAB or FM radio is chosen, you
will be prompted to select a radio channel).
-
Choose when the alarm is to sound:
Daily
,
Once
,
Weekends
,
Weekdays
.
If
Once
is chosen, you will be prompted to select a date.
-
Volume (alarm volume): Sets the alarm volume setting. The alarm will start at
a low volume and steadily increase until the set volume level is reached.
-
Alarm On/Off.
Setting alarm 2
1. Switch the radio on by pressing [
].
2. Press [ ALARM ] twice. “Alarm 2 Setup” will appear on the display.
3. Then follow the same steps as those used for setting alarm 1 as described above.
Snooze
Press [ DIMMER/SNOOZE ] when the alarm sounds. Press the required number of
times to select the snooze duration setting that you desire,
5
,
10
,
15
or
30
minutes.
The snooze feature will then display a countdown for the time you have set.
Switching the alarm off
Press [
]
to stop the alarm sounding.
Activating/Deactivating a programmed alarm
In “on” mode:
1. Select which alarm is to be activated/deactivated by pressing [ ALARM ] repeatedly.
2. Press [ |
◄◄
] or [
►►
| ] repeatedly to select
On
(activate) or
Off
(deactivate).
Confirm by pressing [ SELECT ].
In standby mode:
Press [ ALARM ] the required number of times to activate/deactivate either of
the respective alarms.
Summary of Contents for DAB X50
Page 2: ...2 ...