![background image](http://html.mh-extra.com/html/exibel/bdx600/bdx600_user-manual_2450338008.webp)
8
Eng
lis
h
4.5 Sleep function (using the remote control)
The sleep function allows you to switch the product off after the desired time.
1. Press [ SLEEP ] (31) when the main unit is switched on. “SLEEP SETTING” briefly
appears on the display, press repeatedly to select the preferred time to switch off.
SLEEP 90–80–70–60–50–40–30–20–10–OFF
. Release the button at the desired
setting to confirm the switch-off time.
2. The display shows alternating set functions and the number of minutes remaining
until the product switches off “SLEEP REMAIN XX”.
3. Switch off the set sleep function by pressing [ SLEEP ] (31) repeatedly until
“SLEEP OFF” is displayed.
4.6 Listening to radio
Tips for getting the best reception:
• The product has a thread antenna (19) for receiving FM/DAB signals. For the best
possible reception, unwind the antenna fully and try different positions until you
have a good reception.
• For DAB radio, the antenna should be vertical i.e. pointing straight up or down.
4.6.1 DAB/DAB+mode, Full-scan starts automatically
Automatic scanning for channels:
1. Press [
/I ] (7) or [ STANDBY/ ] (24) (in standby mode) to switch on the radio.
The display will show “Welcome to DAB Radio”. The product will automatically
start DAB mode and scan for channels. “Scanning - -” is displayed while
the channels are being scanned as well as a progress bar showing the time spent
and the number of channels found. In full-scan mode, the product scans for all
channels on DAB/DAB+ Band III.
2. Once the channel scan is complete, the radio will select the first station (in
alphabetical order). Show channels discovered by pressing [
9
]/[
:
] (28) or
[ SKIP/TUNE SEARCH ] (11) repeatedly. When the required channel appears on
the display, press [ SELECT ] (13) or (29) to begin listening.
4.6.2 DAB/DAB+ Start Full-scan manually
Manual scanning for channels.
1. Press [
/I ] (7) or (24) (in standby mode) to switch on the radio.
2. Start automatic channel scanning (when you are in DAB mode) by holding in
[
4
/
;
] (28) or [ PLAY/PAUSE ] (16).
3. “Scanning- - -” is displayed while the channels are being scanned as well as
a progress bar showing the time spent and the number of channels found. In full-
scan mode, the product scans for all channels on DAB/DAB+ Band III.
4. Once the channel scan is complete, the radio will select the first station (in
alphabetical order). Show channels discovered by pressing å [
9
] [
:
] (28) or
[ SKIP/TUNE SEARCH ] (11) repeatedly. When the required channel appears on
the display, press [ SELECT ] (13) or (29) to begin listening.
Summary of Contents for BDX600
Page 83: ...83 ...