7
En
gl
is
h
Connecting two speakers with TWS
(True Wireless Stereo)
Bluetooth
OFF
Two Speaker Connection with TWS (True Wireless Stereo)
TWS ON
Left Speaker
Right Speaker
3 s
3 s
Left Speaker
Right Speaker
2 s
2 s
2
1
3
Note:
TWS is only available when the speakers are connected via Bluetooth. The
speakers must be of the same model.
1. Ensure that both speakers are of the same model and that Bluetooth is inactivated
on the external device.
2. Check that both speakers are on and that the indicator lights are flashing blue.
3. Long-press [ ] on both speakers until they emit an audible signal. The speakers
will try to connect to each other.
4. The speakers will emit a signal and the indicator light on one of the speakers will
shine. The indicator light on the other speaker will flash blue while the speaker is
waiting to be paired via Bluetooth to an external device.
5. Connect the speakers to the device as instructed in the section titled
Connecting
an external Bluetooth device.
To cancel the stereo mode, long-press
[
] for 2 seconds on one of the speakers until
both speakers emit an audible signal.
Specifications
Connectivity
Bluetooth
ID
BOOM-X
Output power
10 mW
Frequency response
2402–2480 MHz
Range
approx. 10 m
AUX
3.5 mm audio jack
Other
Built-in battery
3600 mAh lithium-ion,
7.4 V
Charging time
approx. 4 hours
Playback time
approx. 12 hours
IP rating
IPX6
Speakers
2 × 20 W, 2 × 10 W
Dimensions
310 × 152 × 118 mm
Weight
2164 g
Summary of Contents for 39-1293
Page 2: ...2...