![background image](http://html1.mh-extra.com/html/exibel/36-4279/36-4279_manual_2450217009.webp)
EN
G
LI
SH
9
Sys Reset (restores factory settings)
Press [OK] and select
Cancel
or
Execute
(confirms setting).
TV Output (select output format for TV-system)
Press [OK] and select
NTSC
or
PAL
(PAL is used in Europe).
Date Input
Press [OK] and select
Off (
date not saved with picture) or
Set
(enter year, month,
and time to be saved with the image).
USB*
The camera can be used in Windows directly with existing drivers when in
the “Disk Drive” position.
If “PC Cam” position is used drivers must be installed from the accompanying CD
disc before the camera is connected to the computer.
Press [OK] and select
PC Cam
(transfers still/video to PC via USB-cable) or
Disk Drive
(saves images on SD-memory card).
*NOTE!
This setting must be in place before the inspection camera is connected to PC.
Settings: Picture display position
Press the joystick (3) downward [MENU] to open menu.
Delete (deletes picture)
• Press OK] and select
Single
(deletes the image being shown) or
All
(deletes all images).
• Press [OK] and select
Cancel
(or
Execute
(confirms deletion).
Copy to Card (copies images from internal memory to SD-memory card)
Press [OK] and select
Cancel
or
Execute
(confirms copying).
Slideshow (sets interval for picture slideshow)
Press [OK] and select
3 Sec, 5 Sec,
or
10 Sec.