Exhausto VEX4000, Original Instructions Manual

Page: 43 / 52

Service menu
Damper Description
Shown only in case of
modulating damper mo-
tor
Shown only if modula-
ted recirculation is con-
figured
Exhaust air damper, status
●
Current damper position: [%]
●
Current supply air [m3/h] [l/s]
Recirculation damper
Recirculation damper, status
●
Current damper position: Open/closed
●
Current supply air [m3/h] [l/s]
Shown at Belimo Mod-
bus damper motor Damper motor, Modbus
●
Current damper setting [%]
●
Absolute position [Feedback]
●
Test run: Yes/No
●
Communication [Active] / [Inactive]
Shown only in case of
modulating damper mo-
tor Set recirculation damper
●
Current damper setting [%]
●
Set correction factor
●
Set offset [V]
●
Current supply air [m3/h] [l/s]
Shown only if modula-
ted recirculation is con-
figured Set I-time for modulated recirculation
●
P-band VOC/CO2 [ppm]
●
Set I-time VOC/CO2 [sec]
●
Set I-time temperature [s]
Shown only if modula-
ted recirculation is con-
figured Set gain factor for modulated recirculation
●
Set gain factor
Smoke-evacuation damper
Damper motor, Modbus
●
Current damper setting [%]
●
Absolute position [Feedback]
●
Test run: Yes/No
●
Communication: Active / Inactive
Override smoke-evacuation damper
●
Current damper setting [%]
●
Set remaining time until overriding terminates
[hh:mm:ss]
●
Override: On/ Off
3005263-2015-08-20
Service level
43/52