EXFO IQS-9100 User Manual Download

Page: 60 / 99

Maintenance

IQS-9100

Cleaning EUI Connectors

Cleaning EUI Connectors

Regular cleaning of EUI connectors will help maintain optimum
performance. There is no need to disassemble the unit.

To clean EUI connectors:
1.

Remove the EUI from the instrument to expose the connector
baseplate and ferrule.

Moisten a 2.5 mm cleaning tip with

one drop

of isopropyl alcohol

(alcohol may leave traces if used abundantly).

Slowly insert the cleaning tip into the EUI adapter until it comes out on
the other side (a slow clockwise rotating movement may help).

Gently turn the cleaning tip one full turn, then continue to turn as you
withdraw it.

MPORTANT

If any damage occurs to internal connectors, the module casing will
have to be opened and a new calibration will be required.

Push

Turn

Pull

Summary of Contents for IQS-9100




































































































Search results

Summary of Contents for IQS-9100

Reviews:

Related manuals for IQS-9100

Brands by name

Popular brands

EXFO IQS-9100, User Manual

Search results

Summary of Contents for IQS-9100

Reviews:

Related manuals for IQS-9100

Brands by name

Popular brands