System Tabs
Ethernet and Fibre Channel Application
377
FC Test Preferences
Configuration
Laser On
: Allows to select
Laser On
every time a test is created manually
using the wizard. This setting is selected by default.
Interface Configuration
Note:
The following interface configuration parameters are available for both
ports (IQS-8510B).
PSP (Link Protocol)
: Enabling the Primitive Sequence Protocol (PSP)
allows link management. Disabling the
PSP
forces the port in
Active
mode.
Login
: Login is only available with Framed Layer 2 and allows
changing the Advertised BB_Credit value.
Advertised BB_Credit
: Advertised BB_Credit is the number of frame
buffers that a local port has available to receive frames from another
port, and is advertised to the remote port through the login process.
Enter the
Advertised BB_Credit value
. Choices are from
1
to
65535
.
The default setting is
10
.
WWN Source
: The Worldwide name is only available when Login is
selected with
Fabric
network topology. Enter the Worldwide name
source address.
