EtherSAM Tabs
Ethernet and Fibre Channel Application
345
Overview (Results)
Max Round-Trip Latency (ms)
indicates the maximum measured
round trip latency (delay). For IQS-8120NGE and IQS-8130NGE in Dual
Test Set, only available when round-trip latency measurement mode is
selected.
Max Latency (ms)
indicates the maximum measured one way latency
(delay). Only available with IQS-8120NGE and IQS-8130NGE in Dual
Test Set one-way latency measurement mode.
Not Measurable
is
displayed when the maximum latency is higher than 500 ms.
Verdict
indicates that the performance metrics (Jitter, Latency, and
Frame Loss) comply (pass
) or not (fail ) to the SLA
configuration. The verdict is based on the results from all the ramp
steps excluding the
Traffic Policing
step.
Max RX Rate
indicates the measured maximum utilization RX rate
(throughput).
Verdict
indicates the maximum throughput complies (pass
) or not
(fail
) to the maximum allowed value based on either the configured
CIR+EIR or CIR when CIR+EIR is not enabled.
Note:
Each metric with a fail verdict will be displayed with a red background.
