EXFO IQS-600 Series, User Manual

Page: 29 / 379

Integrated Qualification System
21
3 Getting Started with Your
Integrated Qualification
System
You can either use your IQS-600 Integrated Qualification System as a
benchtop unit, or you can install your units in a rackmount.
You can adjust the angle of your IQS-605P-HS controller unit in order to
have a better view of the screen. Use the stand located under the front part
of the unit and pull it down and forward.
C
AUTION
If you are using your Integrated Qualification System as a benchtop
unit, do not turn it on its side. The platforms and modules were not
designed to function in this position and, therefore, would either
be damaged or provide inaccurate measurements.
No Yes