Remote Control
44
FLS-2600
General Commands
*OPC?
Description
This query puts an ASCII 1 in the output queue when the
content of the input queue has been processed. This query is
useful to prevent another command from processing until the
current command is complete.
Syntax
*OPC?
Response
“1”
*RST
Description
This command empties the step response list. It is only seen
when it is part of another multiple command. In the example
below, by adding this command after *IDN?, you will not be
able to access the answer. The *RST, in this instance, erases the
identification string. In addition, this command performs the
following operations:
1. Return to initial state before command was sent, and not
necessarily to previous settings.
2. Force the device to enter into an Operation Complete
Command Idle State (OCIS).
3. Force the device to enter into an Operation Complete
Query Active State (OQAS).
4. Initialize previous responses unless there has been a
program message terminator preceded by an *RST.
Syntax
*RST
Example
*IDN?;*RST<NL>
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
