Tunable Laser Source
19
5
Using the FLS-2600 Setup
Menu
The first item in the
Setup
menu is the shortlist of wavelengths (LAMBDA
mode), i.e., the preset wavelengths that will be readily available in the
main menu by simply pressing
Up
or
Down
. Up to 80 wavelengths can be
stored in the shortlist for each configuration (see
Saving a Setup
Configuration
on page 23).
Note:
By default, 32 different ITU wavelengths are saved in the shortlist of
wavelengths. It is possible to modify this preset list of wavelengths, but they
will be recalled automatically in configuration 1 of the
Setup
menu after a
reset of the unit.
Consulting the Shortlist of Wavelengths
To consult the shortlist of wavelengths,
1.
Press
Setup
. The
Lambda
marker appears on the display.
2.
Press
ENTER
to enter LAMBDA mode. The
Edit
marker appears in the
lower part of the display.
3.
Rotate the knob clockwise to see the wavelengths included in the
shortlist.
Adding a Wavelength to the Shortlist
To add a wavelength to the shortlist,
1.
Press
Setup
. The
Lambda
marker appears on the display.
2.
Press
ENTER
to enter LAMBDA mode. The
Edit
marker appears in the
lower part of the display.
3.
Rotate the knob clockwise until
Add
is displayed (if the shortlist is
empty,
Add
is immediately displayed).
4.
Press
Edit
. A default wavelength is suggested, in nm or THz, as selected
in the main menu, and the
Edit
marker starts blinking in the lower part
of the display.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
