5mm Allen Wrench
With Phillips Screwdriver
13-15mm Wrench
Step 5. Handlebar Installation
Attach the
Handlebar (4)
onto the
Rear Supporting Tube (15)
using, two
Curve Washers
(30)
, two
Spring Washers (102)
, and two
Carriage Bolts (101)
. Then tighten the bolts with
the
5mm Allen Wrench with Phillips Screwdriver
provided.
Attach a
Nylon Nut (34)
to the threaded end of the
Carriage Bolt (101)
. Tighten the
Nylon
Nuts (34)
with the 1
3-15mm Wrench
provided.
Connect the
Hand Pulse Wire (98)
from the
Handlebar (4)
to the
Connection Wire A (79)
from the
Seat Post (5)
as shown in
Fig. AA-5.
ASSEMBLY
13
Tool:
(101) Carriage Bolt
2PCS
(30) Curve Washer
2PCS
(102) Spring Washer
2 PCS
(34)
Nylon Nut
2 PCS
Hardware:
