EXEL Tecnare TANIT Operation Manual Download Page 3

Page: 3 / 35

General Information

TANIT Operation Manual

Ver.: 1.1_UK 09/2019

The information contained in this manual has been carefully

checked for accuracy, at the time of going to press, however

no guarantee is given with respect to the correctness.

Exel Acoustics SL accepts no responsibility for any errors or

inaccuracies that may appear in this manual or the products

and software described in it. Technical specifications, dimen

sions, weights and properties do not represent guaranteed

qualities. As manufacturers we reserve the right to make

alterations and modifications within the framework of legal

provisions, as well as changes aimed at improving quality.

EXEL ACOUSTICS SL

CL Encinar, 282 – Pol. Ind. Monte Boyal

45950 Casarrubios del Monte (Toledo) Spain

Phone: (+34) 918 170 110 Fax:

e-mail:

[email protected]

www.tecnare.com

Summary of Contents for Tecnare TANIT




































Search results

Summary of Contents for Tecnare TANIT

Reviews:

Related manuals for Tecnare TANIT

Brands by name

Popular brands

EXEL Tecnare TANIT, Operation Manual

Search results

Summary of Contents for Tecnare TANIT

Reviews:

Related manuals for Tecnare TANIT

Brands by name

Popular brands