Page | 10
CONNECTION TO ELECTRIC MAINS
•
The heater is designed for connection to the single-phase 230-
240V~50-60Hz electric mains equipped with a earth.
•
Before connection, make sure that specifications of the electric
mains at the connection point meet the single-phase 230-240V~50-
60Hz voltage.
•
The electric mains should be equipped with an automatic circuit
breaker with rated current not less than 16A.
•
The heater must not be located immediately below a power point.
Power point should not be located at the back of the heater. The
power point needs to be located outside the physical footprint of the
heater to minimize heat build-up behind the heater.
3. How to operate
Operation instruction
：
①
Ceramic glass panel
②
ON/OFF main power switch
③
Power cords and plug
④
Brackets for wall or ceiling mounting
⑤
Remote control
