EXCELL PRECISION CO., LTD
02022010
ZSME300000197
5
1-3 Keypad Function
ON/ZERO KEY
When the power is off, press
ON /ZER O
key to switch the indicator on.
When the power is on, press
ON/ZERO
key to return to zero.
Zero Range for non-approval models is
±
2% Full Scale.
OFF KEY
Press the OFF
key to switch the indicator off.
TARE/PT KEY:
Tare / Pre-tare key
To TARE:
Place the container onto the scale, wait until the weight value is stable, press TARE/PT
key for zero return and the NET indication is shown on the display.
Place the object onto the container and the display shows the net weight value of the
object.
Remove both object and container, and negative value of the container will show on the
display.
Press TARE/PT again
to clear “tare value”. The scale returns to zero and NET indication
goes off.
TARE function can remain effective until tare value=full load capacity
Continuous Tare
Press TARE/PT key for continuous weight increase/decrease on
platter.
Pre-tare cannot be done in tare function. However, if a pre-tare had been preset, and
the tare weight is
more
than that pre-tare weight, then the Tare can be done.
No Tare can be done under gross weight display mode.
To PRE-TARE:
Press TARE / PT key, use keypad to input pre-tare weight. When the cursor flashes on
the rightmost digit, press TARE / PT key again to complete.
Pre-tare mode, keypad function as followed:
MC => upward key(0~9 digit entry) NET/GROSS => move cursor leftward
UNIT => downward key(0~9 digit entry) TARE/PT => move cursor rightward
UNIT KEY
Press the UNIT key to switch weight units; the display icons will indicate the active units.
Summary of Contents for HJW
Page 2: ......
