background image

10

anti-Carjacking Protection

  The system is equipped with two separate Anti-Carjacking protection features (igni

-

tion, open door, or both)�  All are programmable, and must be turned on to operate�  

Once activated, the user has 53 seconds to cancel the Anti-Carjacking protection 

process (described below)�  If Anti-Carjacking is not cancelled, 53 seconds after being 

activated the siren will begin to chirp for 7 seconds to alert the user that the system 

is about to enter into an alarm condition�  The Valet Switch may still be pressed once 

during this period to cancel the Anti-Carjacking process�

  If the Anti-Carjacking process is not cancelled before the 60 second countdown 

expires, the system will enter an alarm condition, sounding the siren and flashing the 

parking lights�   30 seconds after this occurs, or should the ignition be turned off in the 

meantime, the stater interrupt will engage� Once the system enters the alarm condi-

tion, it will not respond to the transmitter, nor will the system reset automatically after 

60 seconds, and it can only be disengaged by:

Step 1

  Turning the vehicle’s ignition off�

Step 2

  Turning the ignition back on�

Step 3 

 Within 5 seconds, perform an Emergency Override using the Valet Switch�  If 

the SecureCode has been customized, the correct number of Valet Switch presses 

must be made�  

The different types of Anti-Carjacking protection are:

ignition activated anti-Carjacking 

activates every time the vehicle’s ignition is 

turned on�  The Valet Switch must be pressed within 60 seconds of activating to can-

cel Anti-Carjacking� This is User Programmable Feature #15�

Door anti-Carjacking 

activates when a door is opened after the vehicle is started 

and the engine is running�  The Valet Switch must be pressed within 60 seconds after 

activation to cancel Anti-Carjacking� This is User Programmable Feature #15�

Summary of Contents for rS-350-eDPb





















Reviews: