15
Programmable Features Matrix
Feature #12 Manual Transmission Remote Start
Off
(press “unlock” button to program)
- DEFAULT
On
(press “lock” button to program)
Enabling this feature requires a “setup” procedure to be performed that ensures
the transmission is in neutral before remote start can be performed� See page 8 for
more information�
User Feature Programming
: Ignition on, off, press valet 5 times
# Feature
Lock Button
Unlock button Trunk button ”START” button
1 Engine Run Time
10
5
15
20
2 RS Light Confirmation
Steady
Flashing
3 Horn Honk Volume
Low
Hi
On Demand
OFF
4 Pulse Horn/Steady Siren
Pulse LO
Pulse MED
Pulse HI
Steady Siren
5 Lock w/ IGN on
On
Off
6 Unlock w/ IGN Off
On
Off
7 Unlock w/ Trunk release
On
Off
Installer Feature Programming
: Ignition on, off, press valet 10 times
1 Remote Start Activation
1 press
2 presses
3 presses
4 presses
2 PINK/WHITE Wire Function
Ignition
Accessory
Start
3 Engine Detection
Tachless Hi
Tachless Lo
Tach Wire
Datatach
Crank Only (press Lock + Unlock)
4 Gas or Diesel Engine
Gas
Diesel
(15 sec.)
Diesel
(20 sec.)
Diesel
(30 sec.)
5 Sat. Port Green Wire Function Start
Pulse after start Status
Dome Light
6 Sat. Port Blue Wire Function
Status
Ignition
7 Crank Time
0.7 sec
1 sec
1.5 sec
2.25 sec
8 Low Temp Crank Extender
0ms
200ms
300ms
400ms
9 Door lock outputs
0.8 sec
3 sec
Double Unlock Total Closure
10 Remote Start Lock Control
Off
Lock after start Unlock before
start
Both
11 Turbo Timer
Off
1 min
2 min
3 min
12 Manual Transmission
On
Off
13 Data Port Protocol
D2D (Trilogix)
ADS (iData)
Feature #13 Data Port Protocol
D2D (Trilogix)
(press “lock” button to program)
- DEFAULT
ADS (iData)
(press “unlock” button to program)
This feature determines which data protocol is used on the data ports� Choose this
based on the interface module being used�
NOTE: OmegaLink modules support
both protocols� The ADS protocol is recommended for maximum capabilities�
Installer Programmable Features (cont’d)
