7
Step 1
Turn the ignition key “ON”, then “OFF”
Step 2
within 5 seconds of step 1, press the valet switch 5 times to access user
features (10 times to access installer features).
~ The parking lights and the status light (optional) will turn on.
Step 3
within 10 seconds of step 2, press the valet switch the number of times cor-
responding with the desired feature’s number.
~ The status light (optional) and the parking lights will flash equal to the selected
feature.
Step 4
Change the feature by pressing the brake pedal the same number of times
that corresponds with the desired setting.
~ The status light (optional) and the parking lights will flash equal to the selected
setting.
Step 5
If you wish to change more features, repeat steps 3 & 4 at this time.
Step 6
To exit programming, turn the ignition key “ON” then “OFF”. Or, you can wait
10 seconds for programming mode to expire. The lights will turn off.
Programming Features
Feature #1 Remote Start Run Time
10 Minutes
(press t
he b
rake pedal 1 time to program) -
DEFAULT
5 Minutes
(press t
he bra
ke pedal 2 times to program)
15 Minutes
(press t
he br
ake pedal 3 times to program)
20 Minutes
(press t
he br
ake pedal 4 times to program)
This feature sets the period of time that the engine will run after being remotely
started. If the engine is not stopped by controller/transmitter command or a safety
circuit violation, the engine will automatically stop upon the expiration of the selected
time period.
Caution: The remote engine starting feature should NEVER be
used when the vehicle is parked in an enclosed structure or garage.
This group of User Programmable Features are all accessed as a group in the first
level of features’ programming. These features have a direct affect upon the sys-
tem’s operations, so the programming and operation of each are described.
Feature #2 Steady/Flashing Lights During Remote Start
Steady
(press the brake pedal 1 time to program)
- DEFAULT
Flashing
(press the brake pedal 2 times to program)
This Feature configures the operation of the vehicle’s parking lights during the
remote start operation. The default setting turns on the parking lights during remote
start; the other setting flashes the parking lights on and off during remote start.
User Programmable Features
