90-Day Warranty
EXCALIBUR ELECTRONICS,
INC., warrants to the original con-
sumer that its products are free from
any electrical or mechanical defects
for a period of 90 DAYS from the
date of purchase. If any such defect is
discovered within the warranty peri-
od, EXCALIBUR ELECTRONICS,
INC., will repair or replace the unit
free of charge upon receipt of the unit,
shipped postage prepaid and insured
to the factory address shown at right.
The warranty covers normal con-
sumer use and does not cover damage
that occurs in shipment or failure
that results from alterations, accident,
misuse, abuse, neglect, wear and tear,
inadequate maintenance, commercial
use, or unreasonable use of the unit.
Removal of the top panel voids all
warranties. This warranty does not
cover cost of repairs made or attempt-
ed outside of the factory.
Any applicable implied warranties,
including warranties of merchantabil-
ity and fitness, are hereby limited
to 90 DAYS from the date of pur-
chase. Conse-quential or incidental
damages resulting from a breach of
any applicable express or implied
warranties are hereby excluded. Some
states do not allow limitations on the
duration of implied warranties and
do not allow exclusion of inciden-
tal or consequential damages, so the
above limitations and exclusions in
these instances may not apply. The
only authorized service center in the
United States is:
Excalibur Electronics, Inc.
13755 SW 119th Ave
Miami, Florida 33186 U.S.A.
Phone: 305.477.8080
Fax: 305.477.9516
www.ExcaliburElectronics.com
Ship the unit carefully packed,
preferably in the original carton,
and send it prepaid, and adequately
insured. Include a letter, detailing the
complaint and including your day-
time telephone number, inside the
shipping carton. If your warranty has
expired and you want an estimated
fee for service, write to the above
address, specifying the model and the
problem.
PLEASE DO NOT SEND YOUR
UNIT WITHOUT RECEIVING AN
ESTIMATE FOR SERVICING. WE
Excalibur Electronics reserves the right to make technical changes
without notice in the interest of progress.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable l
interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
•
Do not place anything on top of the unit.
•
Avoid rough handling such as bumping or dropping.
•
Avoid moisture and extreme temperatures. For best results, use
between the temperatures of 39˚ F and 100˚ F (4˚ C and 38˚ C).
•
Unplug the electrical cord prior to cleaning. Clean using only a
slightly damp cloth. Do not use cleaners with chemical agents.
Special Care & Handling
10
11
