10
11
3. Plug the other end of
your phone charge cord into
your personal cell phone.
4. Once phone is plugged
into its charge cord contin-
ue to pull the
RIP CORD
for
one minute
(approximately
80 pulls per minute)
.
This can provide up to
two minutes of talking time
with this process. The
phone’s cell life can also be
extended by continuing the
pulling the
RIP CORD
during
the phone’s use.
Caution
• Forever Flashlight Rip Cord generates a strong
magnetic field that surrounds it. Keep the unit at least one
foot away from medical devices, computers, magnetic
storage media, or other devices such as:
• Pacemakers
• Credit cards
• Cassette tapes
• Televisions
• Computer discs
• Video tapes tube (CRT)
• Any device with a cathode ray
• Do NOT attempt to remove the Light Emitting Diode (LED)
or any internal part.
• Do NOT attempt to point the light into the human eye directly.
This strong light may cause physical damage to an eye.
• Do NOT attempt to put wrist band around any other parts of the
body, besides the wrist. Children under age should not use
the Forever Flashlight Rip Cord and should have
adult supervision at all times.
Excalibur Electronics reserves the right to make
technical changes without notice in the
interest of progress.
Specifications
• Outer dimension: 5''
x
1.75''
x
1.75''
• Weight: 0.40 lbs
• 5mm LED: 5x @ 9200mcd, 0.5W
• Power generator: 6V, 300mA
• Siren sound output: 92dB (optional)
• DC output: 4.5V, 600mA
• DC input: 6V, 200mA
N
OT ALL CELL PHONES USE THE SAME CURRENT TO CHARGE THE
CELL PHONE
. T
HIS DEVICE OUTPUTS
400
MA
. Y
OU MUST CHECK
YOUR CELL PHONE MANUAL TO MAKE SURE THAT THE CHARGING
CURRENT FOR YOUR CELL PHONE WILL CHARGE BELOW
400
MA
.
E
XCALIBUR
E
LECTRONICS
, I
NC
.
IS NOT RESPONSIBLE FOR ANY
DAMAGE TO YOUR CELL PHONE IF A DIFFERENT CHARGING
CURRENT IS REQUIRED
.
