background image

User Programmable Features (cont’d)

Feature #9 - Last Door Arming

 

Off 

         (press 

LOCK 

to 

program) 

On w/o doors locking  (press UNLOCK to program)

On w/ doors locking    (press TRUNK to program)

“Last Door Arming” has the system automatically arm itself every time you exit the vehicle 

(the complete operation is described on page 8)�  

Feature #10 - Automatic Rearming

Off         (press 

LOCK 

to 

program) 

On w/o doors locking  (press UNLOCK to program)

On w/ doors locking    (press TRUNK to program)

Enhanced auto rearm  (press START to program)

“Automatic Rearming”, described on page 9, rearms the alarm if accidentally disarmed�  

Options are to have Automatic Rearming operate with or without also locking the doors 

when the system does rearm� Enhanced auto rearm allows you to cancel the rearming 

sequence by pressing unlock a 2nd time after disarming�

Feature #7 - Unlock w/ Trunk Release

On      (press LOCK to program) 

Off      (press UNLOCK to program) 

“2nd channel” is most commonly used for trunk release, in which case the alarm should 

also disarm.  This feature, when on, configures the system to unlock/disarm when the 2nd 

channel is activated�

Feature #8 - Remote Start Activation From The Remote

Press START button 1 time    (press LOCK to program) 

Press START button 2 times   (press UNLOCK to program) 

Press START button 3 times   (press TRUNK to program) 

Press START button 4 times   (press START to program)

This feature changes how the remote start feature is activated from the remote�

Feature #11 - Confirmation Chirps

            

Siren + Horn            (press LOCK to program) 

Siren 

Only       (press 

UNLOCK 

to 

program) 

Horn 

Only       (press 

TRUNK 

to 

program)

On Demand (siren+horn)  (press START to program) 

Off          (press 

LOCK 

UNLOCK 

to 

program)

This feature selects whether the siren and/or horn give confirmation chirps

� Both outputs 

will always sound when the alarm system is triggered or in panic mode�

Feature #12 - Anti-Carjacking

Ignition Only    (press LOCK to program) 

Door Only      (press UNLOCK to program)

Ig Door   (press TRUNK to program) 

Off               (press START to program) 

This selects between the 2 forms of anti-carjacking protection�  Details on using anti-

carjacking protection are described on page 14�

15

Summary of Contents for AL-1670-B

























Reviews: