4
Transmitter Functions (cont’d)
TRUnK RELEASE / ChAnnEL 2:
Press the “TRUnK” button for 3
seconds�
ThE SySTEM WILL DISARM AnD ThE TRUnK WILL
•
OPEn (IF EqUIPPED)�
REmOTE START:
Press and release the “START” button twice
within 5 seconds� (see user feature #17 for additional options)
ThE PARKIng LIghTS WILL FLASh OnCE AnD ThE
•
STATUS LIghT WILL FLASh RAPID gREEn�
ThE SySTEM WILL TURn On ThE IgnITIOnS AnD
•
PROCEED TO START ThE EngInE�
OnCE ThE EngInE IS RUnnIng, ThE PARKIng
•
LIghTS WILL TURn On AnD STAy On AnD ThE STATUS
LIghTS WILL FLASh SLOW gREEn�
If the engine stalls, the system will make up to 3 more attempts�
•
Each time you park, set the climate controls as desired when you use the remote start� The
•
engine will run for the preset run time (see user feature #18)�
Run Time Extender
•
: Press the “START” button one time during remote start to restart the
engine run timer�
nOTE: This can only be used once per remote start cycle.
If you decide not to drive your vehicle, you can turn off the remote start using the same method
•
to turn it on (Default = press “START” twice in 5 seconds)
nOTE: if user feature #17 is programmed for 1 press, the 1st press = Run Time Extender so
an additional press is required.
Upon entering the vehicle during remote start mode, turn the ignition key to the “On/RUn” posi-
•
tion (
nOT START!!
)� When you press the brake pedal, the remote start will turn off allowing the
ignition key to take over�
x2
ChAnnEL 3:
Press and hold the “TRUnK” & “START“ buttons for 3
seconds�
yOUR SySTEM WILL ACTIVATE ThE ChAnnEL 3
•
OUTPUT�
