Client and metadata controller computers need static (fixed) IP addresses for Ethernet network connections. Don’t
use DHCP to assign dynamic IP addresses to SANit devices. We suggest that you use the following ranges of IP
addresses for SANit private metadata network:
• Subnet mask: 255.255.255.0
3.3 SANit Configuration
1. Enter your MDC* IP address in the URL of your computer and then
enter port number 85. See below:
http://[
MDC IP address
]:
85
, for example, http://10.10.88.10:85.
2. Select
Language
, enter
User Name
and
Password
(
Default
password is 0000000
), and then click
Log In
.
Software Installation file on MDC
The following is installation command
1. The file name is SANIT-5.3.3-450.x86_64.rpm (Example version)
#rpm –ivh SANIT-5.3.3-450.x86_64.rpm
#sanit-setup
2. Uninstatall command
#sanit-unsetup
P21
User Guide
Summary of Contents for SW08-Q4
