Operation
Your
Focus Xtend
control unit is operated by
pressing the front panel. A short press will activate
the unit, and further clicks will cycle the unit through
low, medium and high settings. A long press switches
the unit off.
The control unit will not activate unless there is a
lamp unit plugged in. Focus Xtend is compatible
with all ExamVision LED lamps.
Belt Clip
Attach the belt clip to the back of the control unit,
if desired, by following the enclosed instructions.
Connect attachment
Use the Connect Key to
tighten the locking screw
of your Connect attachment,
if you wish to attach
the light tightly to your loupe.
