background image

Your LED light system: User’s guide

Battery care

The lithium ion battery inside your 

Focus Xtend 

is 

covered by our warranty for one year from date of 

purchase.  Follow these useful guidelines, to improve the 

life expectancy of your battery:

The battery is fully charged from the manufacturer.  

It is healthiest for your battery to keep it more than 

30% charged

, and partial charges will not harm

your battery.

The working time of your battery varies with light 

intensity.  The lowest setting can give you up to

24 hours continuous use

, and the highest 

approximately 6 hours.

When the battery needs charging, the charge indicator 

will start to blink.  Charge the unit at this point.

To charge, attach the charger lead to the charger 

socket.  The charge indicator (Bat.) comes on.  When 

the battery is fully charged, the charge indicator will 

turn off.  

When your battery is reaching the end of its natural 

life, after about 500 charges, you will find it will need 

to be charged more frequently.  When this starts to 

limit your working time, it is time to have the battery 

replaced in the control unit.  Your ExamVision dealer 

will be able to arrange this procedure.

1
2

3

4

5

6

Summary of Contents for Focus Xtend







Reviews: