Exalt Installation and Management Guide
EX-r Series GigE Digital Microwave Radios
53
201872-003
2015-10-23
•
Buzzer Timeout (minutes) parameter creates an audio signal for antenna alignment. Turn on the
buzzer continuously during antenna alignment or preset a period of time that the buzzer will
sound. If the buzzer stops before alignment activities are complete, change the selection and press
the Update button or select the ON option until alignment activities are complete.
Note:
Changing the antenna port will temporarily interrupt traffic.
The
polarization of the antennas at each end must match at each end – adjust the far-end radio first,
then the near-end radio.
