SAFETY WARNING
1. Warning
﹡
Every person involved with the installation , operation and maintenance of this device has to be qualified .
﹡
User must follow the instructions of this manual
﹡
Unqualified person can not open the housing cover and operate the device , or the dealer will not accept liability for any
resulting defects or problems.
﹡
The device against rain and moisture
2. Waring notes :
﹡
Power supply : AC 100V-240V , 50/60Hz
﹡
Make sure the power switch is off , the power plug , outlet and the earth connection is in well condition before
connecting the device with the mains.
﹡
Please use qualified power plug and the outlet. Never connect the power cord of this device with other electrical
equipment.
﹡
During move and installation , make sure the device not crashed with metal parts and other tough materials.
﹡
Always disconnect from the mains, when the device is on the installation and dismantled
﹡
The minimum distance between light-output and the illuminated surface must be more than 50cm
﹡
The device must only be installed on a non-flammable surface . In order to safeguard sufficient ventilation , leave 50cm
of free space around the device . Please note that heat-sensitive objects may be deformed or damaged by the emitted
heat .
﹡
During the operation the housing becomes very hot ! Do not operate the device for 15 minutes after switching off .
﹡
The maximum ambient temperature Ta = 45
℃
must never be exceeded , The maximum housing temperature Tb =
80
℃
must never be exceeded .
﹡
For indoor use
﹡
Replace any visible cracked protective shield , filters and lens .
﹡
The protective shiel, filters and lens will require weekly cleaning as smoke “Cfluid tends to building up residues ,
reducing the light “Coutput very quickly.
